Under-Tile Waterproofing Membrane: Types and How to Choose

Under-Tile Waterproofing Membrane: Types and How to Choose

Table of Contents

Where You Need Under-Tile Waterproofing
Common Types of Under-Tile Waterproofing Membranes
How to Choose an Under-Tile Membrane
The Zocoo Under-Tile Waterproofing System

Under-Tile Waterproofing Membrane: Types and How to Choose

calendar

November 17, 2026

Under-Tile Waterproofing Membrane:

Summary: An under-tile waterproofing membrane is a liquid or sheet barrier applied beneath tiles to stop water reaching the substrate. This guide covers where you need one, the common membrane types, how to choose, and the Zocoo Australia under-tile system.

Water can pass through grout joints, cracked tiles and movement points over time. A correctly selected and installed membrane helps protect concrete, screeds and surrounding structures from moisture damage.

An under-tile waterproofing membrane is a liquid or sheet barrier applied beneath tiles to stop water from reaching the substrate. Tiles and cement grout aren't waterproof on their own, so the membrane provides real protection beneath bathrooms, laundries, kitchens, balconies, and other tiled wet areas.

In Australia, waterproofing for internal wet areas must comply with AS 3740, which sets out requirements for waterproofing design, materials and installation in bathrooms, laundries and toilets. Choosing products suited to the application and installed to the relevant standard is an important part of achieving long-term performance.

Looking for the right waterproofing solution for your tiled area? Contact Zocoo Australia today, and we'll help you find a suitable option for your project.

Where You Need Under-Tile Waterproofing

Under-tile waterproofing is used wherever water could pass through tiles and grout and reach the underlying structure. Common applications include:

  • •

    Shower recesses: Floors and walls inside the shower area. See our guide to the shower waterproofing membrane.

  • •

    Bathroom floors: Areas exposed to regular water and moisture.

  • •

    Laundries: Floors and other areas exposed to spills or water.

  • •

    Tiled balconies: External tiled areas exposed to rain and weather. Read more on fixing balcony waterproofing problems.

The waterproofing requirements depend on whether the area is an internal wet area or an external above-ground area. The National Construction Code also sets requirements for wet areas in residential buildings. Together, these requirements help guide the design, materials and installation of waterproofing systems for the relevant application.

Common Types of Under-Tile Waterproofing Membranes

Most under-tile membranes sold in Australia are liquid-applied. WPM is the short form for waterproofing membrane commonly printed on trade packs.

TypeHow it goes onBest suited toWatch out for
AcrylicLiquid-appliedInternal areasSlower curing in cold weather
PolyurethaneLiquid-appliedIndoor and outdoor areasRequires suitable application conditions
Flexible cementitiousTwo-part systemDamp substratesFollow mixing and curing requirements
Sheet membranePre-formed sheetsConsistent thicknessMore joints to seal
Polyaspartic polyureaLiquid-appliedVersatile indoor and outdoor useRapid cure; confirm system suitability

For more information, see our guide to the best waterproofing membrane for homes and construction projects.

How to Choose an Under-Tile Membrane

Choose an under-tile membrane based on the elasticity class, substrate, cure time and tile adhesive compatibility. For outdoor applications, also consider exposure to UV and ponding water.

Elasticity class

Floors that may move, such as timber and plywood, generally require a more flexible membrane. Check the membrane's Class I, II or III elasticity rating under AS/NZS 4858 and match it to the expected floor movement.

Substrate

Check that the membrane is suitable for the surface you are waterproofing, such as concrete, fibre cement, wet area plasterboard, render or marine plywood.

Cure time

Rapid products can allow tiling on the same day, while standard products may require overnight curing or longer. Always follow the manufacturer's specified curing time.

Adhesive compatibility

The membrane and tile adhesive need to be compatible as a complete system. See our grout and adhesive range and guide to the best tile adhesive for showers in Australia.

Outdoor exposure

For balconies and other external areas, choose a membrane rated for outdoor use and suitable for UV exposure and ponding water.

The Zocoo Under-Tile Waterproofing System

Zocoo's under-tile system is built from polyaspartic polyurea products that work together, from primer through to grout.

  • •

    PM-21 Repair Primer: Applied to the whole substrate, including joints, corners and angles, before the membrane goes on.

  • •

    SH-502: A fully bonded membrane for non-exposed wet areas on floors and walls, with over 1700% elongation to handle substrate movement. It suits concrete, masonry, cement, metal, plasterboard, plywood, timber and fibre cement.

  • •

    GB-75: Listed for under-tile waterproofing and wet areas as well as exposed rooftops and terraces, so it also suits external tiled areas.

  • •

    R2T-S7 Tile Adhesive: A flexible two-part polyaspartic polyurea tile adhesive.

  • •

    P97 and P98 Polyurea Tile Grout: Gloss and matte grout options to finish the tiled surface.

Zocoo's membrane product pages call for concrete dried for more than 25 days and render for more than 5 days before priming. Inspect the membrane once dry and before tiling, and apply an additional coat where needed.

Enquire Today

Need help choosing the right under-tile waterproofing membrane for your project? Contact us at Zocoo Australia to discuss your substrate, application and waterproofing requirements.

Our team can help you understand the available waterproofing options and select a suitable membrane for your tiled area.

ZOCOO Products for This Application

SH-502 Polyaspartic Polyurea Waterproofing - 15L

SH-502 Polyaspartic Polyurea Waterproofing - 15L

Ultimate self-healing shield against water, cracks & quakes ZoCoo SH-502 is the first healing, high-performance, fully bonded waterproofing membrane designed for non-exposed wet areas on walls and floors. With exceptional elasticity – over 1700% elongation – it’s built to withstand substrate movement, settlement, and even frequent earthquakes. Durable, flexible, and rupture proof – SH-502 delivers long lasting protection where traditional membranes can’t keep up.

View SH-502
GB-75 Polyaspartic Polyurea Waterproofing - 15L

GB-75 Polyaspartic Polyurea Waterproofing - 15L

Engineered for extreme conditions, built for lifelong durability. ZoCoo GB-75 is a high-performance, two component polyaspartic polyurea membrane engineered for the toughest waterproofing challenges. Ideal for wet areas, exposed surfaces, and potable water systems, it delivers rapid application, exceptional flexibility, and lifelong durability - resisting UV, chemicals, abrasion, and extreme weather with ease.

View GB-75
PM-21 Repair Primer - 15L

PM-21 Repair Primer - 15L

Penetrates deeply for lasting adhesion, and substrate protection ZoCoo PM-21 is a two-component, high-performance repair primer formulated with premium expoxy resin and a Cardanol-modified phenolic amine curing agent. It offers strong substrate bonding, fast drying, chemical and corrosion on resistance, and low VOC performance – ideal for strengthening and sealing concrete and other porous surfaces.

View PM-21
R2T-S7 Tile Adhesive - 4.4L

R2T-S7 Tile Adhesive - 4.4L

ZOCOO Flexible A&B Polyaspartic Polyurea Tile Adhesive is a dual-component, eco-friendly adhesive made from Polyaspartic Ester Polyurea and specialized resins. Consisting of Part A and Part B, it offers superior bonding strength and exceptional flexibility, ensuring durable and reliable tile installation in various environments.

View R2T-S7
P97 Polyurea Tile Grout (Gloss)

P97 Polyurea Tile Grout (Gloss)

Vibrant colours that stand the test of time, with lasting durability. ZoCoo P97 (Gloss) is a two-component polyaspartic ester polyurea grout combing hardness, adhesion, and flexibility. It offers excellent weather and UV resistance to maintain colour integrity for decades. Solvent free and environmentally friendly, it can be custom matched to any tile colour for seamless finishes.

View P97
P98 Polyurea Tile Grout (Matte)

P98 Polyurea Tile Grout (Matte)

Vibrant colours that stand the test of time, with lasting durability. ZoCoo P98 (Matte) is a two-component polyaspartic ester polyurea grout combing hardness, adhesion, and flexibility. It offers excellent weather and UV resistance to maintain colour integrity for decades. Solvent free and environmentally friendly, it can be custom matched to any tile colour for seamless finishes.

View P98
accordion-right-img

Frequently Asked Questions

How long does an under-tile waterproofing membrane take to dry before tiling?

+

Can you tile directly onto a waterproofing membrane?

+

Do you need a licence to waterproof a bathroom in Australia?

+

How many coats of under-tile waterproofing do you need?

+

Can under-tile membranes be used on balconies?

+