
Essential Tools for Waterproofing Application: A Checklist for Every Stage
Table of Contents
Essential Tools for Waterproofing Application: A Checklist for Every Stage
November 17, 2026

Summary: The tools for liquid membrane waterproofing fall into four groups: surface preparation, grout and adhesive, the membrane system itself, and application tools. This checklist names the Zocoo Australia tools and products for each stage.
The right tools make waterproofing easier and help ensure a clean, even application. This practical checklist covers the essential tools you'll need for liquid membrane waterproofing.
The essential tools for waterproofing application fall into four groups: surface preparation, grout and adhesive, membrane waterproofing (polyaspartic polyurea), and application tools.
Surface Preparation Tools
Most membrane failures start with poor adhesion to a dirty, damp or uneven substrate, so surface preparation should come first. Key tools from our equipment range include:
- •
S01 Scraper
- •
W01 Wax
- •
VC01 Vacuum Cleaner
- •
JC01 Joint Cleaner
- •
K01 Knife
- •
MT01 Masking Tape
For more tips on preparing concrete surfaces, see our guide on How to Protect Concrete Surfaces from Water Damage and Cracks, or follow our step-by-step guide on how to waterproof a concrete floor or slab.
Grout and Adhesive
Grout and tile adhesive are part of the final stage of many waterproofing projects, particularly where the waterproofed surface will be tiled. Our range at Zocoo Australia includes specialist alternatives to traditional cement grout for residential and commercial tiling projects across Australia and New Zealand.
- •
W750 Waterbased Epoxy Grout: For durable tile joints
- •
P97 Polyurea Tile Grout: Gloss finish
- •
P970 Polyurea Customised Tile Grout: Customised grout options
- •
P98 Polyurea Tile Grout: Matte finish
- •
R2T-S7 Tile Adhesive: For tile installation
P97 and P98 are applied with a dual barrel caulking gun. Zocoo stocks the CG01 Manual Caulking Gun and the CG02 Electric Caulking Gun, both made for dual-component products.
Membrane: Polyaspartic Polyurea Waterproofing
Our polyaspartic polyurea range includes waterproofing membranes and coatings designed for different applications, from internal wet areas and exposed slabs to demanding structural environments and potable water systems. The right product will depend on the surface, level of exposure and how the finished area will be used.
Primer
PM-21 Repair Primer: High-adhesion repair primer for concrete, cement and mortar substrates before applying a compatible waterproofing system.
Waterproofing
Choose the appropriate system for your application; options include:
- •
SH-502: Fully bonded waterproofing membrane for internal wet areas, including floors and walls.
- •
GB-75: Two-component waterproofing system for exposed slabs, terraces and rooftops, as well as wet areas and potable water applications.
- •
SCW-01: Colourless polyaspartic coating that resists weather and yellowing, for concrete, timber, cement, plywood and similar surfaces.
- •
FW-11: High-strength waterproofing coating for demanding applications such as basements, lift shafts, underground garages and pools.
Not sure which waterproofing membrane suits your project? Contact Zocoo Australia, and we can help you find the best one for your needs.
Membrane Application Tools: Rollers, Brushes and Spray
Rollers cover large flat areas fastest, brushes handle edges, corners and upstands, and spray equipment only pays off on large commercial jobs.
| Tool | Best option for | Limitation |
|---|---|---|
| Roller | Large, flat floor and wall areas | Less precise around corners and detailed areas |
| Brush | Edges, corners, joints and upstands | Slower for large areas |
| Sprayer | Large commercial surfaces and fast coverage | Requires suitable equipment, setup and operator experience |
Enquire About Waterproofing Today
Need help working out which tools, equipment and waterproofing products you'll need for your project? Our team can help. Contact Zocoo Australia to discuss your surface, application and waterproofing requirements.
From surface preparation and mixing through to membrane application and finishing, our friendly team can help you understand the products and equipment suited to your project.
ZOCOO Products for This Application

PM-21 Repair Primer - 15L
Penetrates deeply for lasting adhesion, and substrate protection ZoCoo PM-21 is a two-component, high-performance repair primer formulated with premium expoxy resin and a Cardanol-modified phenolic amine curing agent. It offers strong substrate bonding, fast drying, chemical and corrosion on resistance, and low VOC performance – ideal for strengthening and sealing concrete and other porous surfaces.
View PM-21
SH-502 Polyaspartic Polyurea Waterproofing - 15L
Ultimate self-healing shield against water, cracks & quakes ZoCoo SH-502 is the first healing, high-performance, fully bonded waterproofing membrane designed for non-exposed wet areas on walls and floors. With exceptional elasticity – over 1700% elongation – it’s built to withstand substrate movement, settlement, and even frequent earthquakes. Durable, flexible, and rupture proof – SH-502 delivers long lasting protection where traditional membranes can’t keep up.
View SH-502
GB-75 Polyaspartic Polyurea Waterproofing - 15L
Engineered for extreme conditions, built for lifelong durability. ZoCoo GB-75 is a high-performance, two component polyaspartic polyurea membrane engineered for the toughest waterproofing challenges. Ideal for wet areas, exposed surfaces, and potable water systems, it delivers rapid application, exceptional flexibility, and lifelong durability - resisting UV, chemicals, abrasion, and extreme weather with ease.
View GB-75
SCW-01 Polyaspartic Polyurea Waterproofing
Super adhesion. Colourless finish. Lifetime confidence ZoCoo SCW-01 Colourless Polyaspartic Polyurea delivers permanent, high-performance waterproofing with superior adhesion to various substrates. Its high tensile strength, wear resistance, and 600%+ elongation offer outstanding flexibility and crack resistance. Ideal for exposed, trafficable areas, the CLASS III membrane resists yellowing, corrosion, and chemicals.
View SCW-01
FW-11 Polyaspartic Polyurea Waterproof - 15L
Defends against subsurface pressure other systems can’t handle. ZOCOO FW-11 is a two-component, high-strength polyaspartic polyurea waterproofing system designed for demanding structural applications. Formulated with advanced polyaspartic polyurea, it resists internal hydrostatic pressure and provides a seamless, impermeable barrier. Mildew-proof and alkali-resistant, FW-11 is ideal for repairing and waterproofing damaged concrete and masonry structures.
View FW-11Frequently Asked Questions
Do liquid waterproofing membranes need a heat gun or seam roller?
+How many coats of waterproofing membrane do I need?
+How long should a flood test run before tiling?
+Can I reuse rollers and brushes between coats?
+Do I need a licence to waterproof a bathroom in Australia?
+
