PM-21 Repair Primer

PM-21 sets the new benchmark in the market as a high-performance two-component reinforcement penetrating primer designed for both interior and exterior applications. It delivers a unique combination of fast curing time, strong substrate adhesion, and deep surface penetration. It effectively seals porous surfaces while resisting peeling, efflorescence, and chemical damage, making it ideal as a first primer on a wide range of materials.

 

• Strong adhesion penetrates deeply for lasting durability
• Fast curing minimises downtime and speeds projects.
• Resistant to chemicals, corrosion, and harsh weather.
• Low VOC and odor ensure safe, eco-friendly use.
• Seals moisture and prevents efflorescence damage.
• Easy to apply with reliable, professional results.

 

Where can you use it

 

 First Primer Interior and Exterior

• Floors (as an alkali-resistant primer)
• Walls

Sealing Primer for Exterior

• Walls
• Concrete (ie. Bridges)

 

What Surfaces

Concrete Cement Mortar

  

Quantity

 

It covers 0.3 – 5kg/m² per coat, depending on surface conditions. Highly porous surfaces require a second coat.

POT LIFE: Approx. 30 minutes depends on temperature

CURING TIME: 1 hours (touch dry), 7 days (full cure)

 

Installation Process

 

1. PM-21 must be thoroughly mixed A:B = 1:2 (weight ratio) using a slow speed mixer or hand taking care to avoid introducing too much air into the mix during mixing. Mixing should continue for about 2 minutes or until a homogeneous mix is achieved.
2. Apply by roller or brush. Increase the coverage rate or apply a second coat if necessary.
3. Before construction, ensure that the substrates surface must be clean, dry, no oil stain, n impurities. Cracks need to be sealed.